BIRCOpur I Compact system for treating rainwater
BIRCOpur® is a solution for treating rainwater contaminated by road traffic close to the surface. The filter substrate used binds dissolved heavy metals and retains fine particles from the rainwater. The system’s design and performance are based on the relevant technical requirements of DWA-A 102. Thanks to its compact design, up to 20 m² of impervious surface area per running metre can be connected to the system.
BIRCOpur® I Facts
- Channel system: NW 320
- Length: 1.00 meter
- Continuous anchoring system
- C 40/50 concrete
- 4 mm hot-dip galvanised solid steel angles
- Removable modules (box, filter cushion)
- Easy inspection and maintenance
- Suitable for surfaces of 20 sq.m. per running meter of channel
- Best value for the assessment procedure in accordance with DWA-M 153: pass value 0.15
- Compliant with DWA-A102
- Suitable for treating areas classified as Category III (in accordance with DWA-A102, particle retention in accordance with parameter AFS63)
- Area according to DWA-A 102: 100 m² (Please note: cleaning cycle is shorter)
- With building authority approval (No. Z-84.2.10)
- Load class: A 15 – F 900
BIRCOpur® I Areas of application
- Busy roads and industrial estates
- Busy car parks
- Logistics centres
- Industrial estates, construction sites and commercial areas
- Rainwater treatment as a substitute for the active soil zone
Reliable filtration based on the multi-stage principle
Modular design
The BIRCOcanal® NW 320 concrete channel forms the basis of this innovative filtration solution. With a load class of F 900, it is suitable for linear drainage in car parks or public spaces with heavy traffic.
- The sedimentation box captures solids such as stones, leaves and suspended matter for coarse cleaning. A rubber lip ensures a watertight seal at the edges – providing a secure boundary for the subsequent filtration stage.
- The pre-treated rainwater is channelled through the granular filter bed, which removes organic and inorganic pollutants from the water.
The filtered water flows over the plastic support into the channel’s open discharge chamber. It is available for use as service water, for infiltration or for discharge into watercourses.
The Sedimentation Box
BIRCOpur® is a modular system comprising a sedimentation box, granular filter media and a plastic support frame. Locking hooks in the frame pockets ensure that the sedimentation box sits securely within the channel element. As no filter cake forms, there is no need for frequent maintenance of the filter media. Solids such as sand, leaves, stones and suspended particles are retained in the sedimentation box without reducing the performance of the filter unit. The sedimentation box is easy to inspect, remove, rinse out and reinsert; cleaning intervals depend on local conditions.
The Granulate Filter Cushion
The rainwater already precleaned in the sedimentation box is routed over a cushion containing the filter granulate. Dissolved organic and inorganic pollutants are removed from the water by adsorption and precipitation. The cleaned water is then routed via the free drain to a collector point where it is available for further use or seepage. Thanks to prior preliminary cleaning, the heavy-duty filter granulate remains active for a long time. To ensure homogeneous grain distribution, the fine-grained granulate is incorporated into the filter cushion. The disintegration of the granulate package is practically excluded. The filter cushion must be replaced an average of every 10 years.



